Baby Ox User Manual
-
• On & Off Switch
• Battery Indicator
• Drive Toggle (Forward & Reverse)
• Emergency Switch (On & Off) -
Follow these instructions to attach the wheelbarrow to the Baby Ox by Vinergy:
1. Tilt the Baby Ox body upright and drive it behind the wheelbarrow.
2. Push the wheelbarrow into the Baby Ox body.
3. Tilt Baby Ox back to be on all four wheels.
4. Ensure hooks on the wheelbarrow are locked into slots on the body.
5. Raise wheelbarrow actuator about 1-2 feet.
6. Insert locking key into indicated slots on the Baby Ox body.
7. Insert rod through indicated hole.
8. Attach locking pin to the rod.
9. Apply these steps to both sides of the body.
-
Follow these instructions to remove the wheelbarrow from the Baby Ox by Vinergy:
1. Raise wheelbarrow actuator about 1-2 feet.
2. Detach pins, remove rods, and unhook locking key from the body.
3. Tilt Baby Ox body upright.
4. Lower wheelbarrow actuator.
5. Detach wheelbarrow from body.
6. Reverse body away from wheelbarrow.
-
Follow these instructions to use the wheelbarrow actuator on the Baby Ox by Vinergy:
1. Turn on the Baby Ox by toggling the power switch on the left.
2. Toggle actuator button on right to lift and lower wheelbarrow.
-
Follow these instructions to attach and remove the tow plate from the Baby Ox by Vinergy:
1. Pick up tow plate from front and back ends.
2. Align plate hooks with holes at desired height on the Baby Ox.
3. Make sure plate is secure in place.
4. Remove by pulling the plate up and pulling it away from the Baby Ox.
5. Feel free to place tow plate on any level of the Baby Ox as needed.4. Remove D-Rings from the wheelbarrow.
5. Detach wheelbarrow from the Ox by pulling it toward you from the top.
6. Reverse Ox away from the wheelbarrow.
-
Follow these instructions to attach and remove the rack from the Baby Ox by Vinergy:
1. Safely pick up the rack.
2. Align rack hooks with holes at desired height on Baby Ox.
3. Ensure rack is secure in place.
4. Remove by pulling the rack up and pulling it away from the Baby Ox.
5. Feel free to place tow plate on any level of the Baby Ox as needed.
-
Follow these instructions to attach the rack and box to the Baby Ox by Vinergy:
1. Safely pick up the rack.
2. Align rack hooks with holes at desired height on Baby Ox.
3. Ensure rack is secure in place.
4. Remove by pulling the rack up and pulling it away from the Baby Ox.
5. Feel free to place tow plate on any level of the Baby Ox as needed.
6. Safely pick up the Box.
7. Place box on top of the rack and ensure row ends are lined up with indicated rack slits.
8. Box rows are removable for user to configure spacing as needed.
5. Box rows are removable for user to configure spacing as needed.
-
When operating the Baby Ox by Vinergy, make sure to follow these safety protocols:
1. Always make sure to maintain a clear line of sight when moving forward and backward with the Baby Ox.
2. Refrain from using distracting devices such as a cell phone while operating the Baby Ox.
3. Be aware of pinch points as indicated on specific areas of the Baby Ox actuator.